How To Remove Window Casing

Practiced, footstep-past-stride illustrated guide shows you lot how to remove interior trim without damaging the trim or the wall.

If moldings and trim are badly damaged, it's all-time to replace them. This work isn't particularly hard, but it does take a lilliputian experience at making accurate cuts using a miter box. If this isn't something you have done before, you're probably better off calling a finish carpenter or cabinetmaker to practise the piece of work.

remove interior trim prybar — Beginning insert a prybar backside the trim and pry the against a small wood block.

If y'all are removing molding and trim as part of a remodel with the intention of reusing them, you may be able to save a few dollars by doing the work yourself.

If paint is binding the molding to the wall, use a utility pocketknife to score the paint forth the edges of the molding. And so use a stiff putty knife to carve up the molding slightly from the wall and create a infinite for a pry bar. Slide the putty knife back and forth until you hit the finishing nails that hold the molding to the wall and then follow these steps.

How to Remove Baseboard

i Insert a pry bar at ane set of nails and identify a scrap of wood behind the bar to protect the wall. Pry gently outward to bow the molding away from the wall and loosen the nails. Motility to the next ready of nails and repeat the process until you've loosened the molding along its entire length.

wall_trim_removing_nails_ct100b — If a blast won't pry out, apply a nailset to bulldoze it deep into the trim, and then pry abroad the trim.

ii Sometimes the nails won't loosen, and prying will cause the nails to pull through the molding. If the nails are stuck, utilise a nailset to bulldoze them about 3 quarters of the fashion through the molding'due south thickness. You demand not get all the way through.

wall_trim_removal_ct100c — You lot can ease molding away from the wall by prying in two locations.

3 Work with a pair of pry confined to remove the molding, leapfrogging the bars in turn to gradually ease the molding away from the wall without cracking or breaking it. With the molding off, apply a hammer or pry bar to remove any nails that remain in the wall. Characterization each piece as you remove it then you know where to replace information technology later.

Removing Door and Window Trim

Door and window trim is oft nailed with a small-scale nail at the mitered corners. If you pry at these points, the wood may dissever. Offset, use a mini-hacksaw to cut off the nails at the joint. If you do terminate up splitting trim when removing it, just glue information technology together and so put a condom band around it or record it with masking tape until the glue dries.